Just like passenger cars, commercial vehicles are traditionally sold through dealerships, and these dealerships must also make investments in new facilities and training in order to sell EVs. Vehicle-makers are establishing certification programs to make sure their dealers are prepared to provide a good experience to their customers as they make the transition to EVs…. Read more…
Author: chargedevs
Ekoenergetyka to sell 140 bus charging stations to Scandinavian public transport operator
Polish EV charging provider Ekoenergetyka will deliver up to 140 chargers for electric buses to Nobina, a Scandinavian public transportation operator. Ekoenergetyka will install its Axon Easy 120 kW and 180 kW DC chargers at four bus depots in Stockholm this year, and plans to bring them online by January 2025. Ekoenergetyka sells throughout Europe—it… Read more…
The launch of Power2Drive South America Exhibition and Conference 2024
Sponsored by Power2Drive. Renewable energies, energy storage and e-mobility play a central role in achieving climate protection targets. As efficient and environmentally friendly mobility solutions, electric vehicles have an important contribution to make to the energy transition. Power2Drive highlights the significance of electric cars for the energy mix and transport of the future. It introduces… Read more…
Xos receives order for 12 of its SV electric stepvans
US electric truck manufacturer and fleet services provider Xos has received an order for 12 of its 22-foot SV stepvans from California-headquartered commercial laundry company Mission Linen Supply. The vehicles will be among the first of the longer 22-foot models to be delivered by Xos. They are suited to a variety of applications, including linen… Read more…
Oomph’s new Powerstream mobile rapid DC charger
British EV charging technology company Oomph has introduced the new Powerstream mobile 30 kW DC charger. The Powerstream is portable, and requires no installation. It’s aimed at applications in which fixed chargers are not an appropriate solution and at locations where deploying fixed charging infrastructure would require long installation times, high utility and groundwork costs,… Read more…
MP Materials has an ambitious US rare earth supply chain strategy to fuel EV innovation
Q&A with MP Materials’ Matt Sloustcher. There’s much hand-wringing in the press these days about battery raw materials such as lithium, cobalt and nickel. However, save some of your anxiety for rare earth materials. These elements (which are not particularly rare, but seemed so to the scientists who named them back in the 18th century)… Read more…
Cheaper EVs are starting to show up in smaller global markets
Media coverage of EVs tends to focus on the world’s largest auto markets: North America, Europe and Asia. Until recently, that’s been where most of the action was, but in many smaller markets around the world, voltage levels are starting to rise. Chinese automakers, which now have a range of lower-priced EVs to sell, are… Read more…
EnviroSpark wins Georgia NEVI awards to install DC fast chargers at Waffle House and Shell station
EnviroSpark’s installers may soon become connoisseurs of hash browns. The company has won a National Electric Vehicle Infrastructure (NEVI) funding award from its home state of Georgia to build four DC fast chargers at a Waffle House in Tifton, and four more at a Shell station in Metter. EnviroSpark, which won two of the five… Read more…
Amprius expands product portfolio with new silicon anode battery platform
US-based battery manufacturer Amprius Technologies has expanded its silicon anode battery line for electric mobility. The new SiCore product platform produces high-energy-density silicon anode batteries that outperform graphite cells using a proprietary silicon anode material technology, according to the company. The new silicon anode cell offers up to 400 Wh/kg specific energy and 1,200 cycles… Read more…
Mitsubishi Electric releases SiC and Si power modules for EVs
Mitsubishi Electric has announced the coming release of six new power semiconductor modules for various EVs. The J3-Series modules contain either a silicon carbide metal-oxide semiconductor field-effect transistor (SiC-MOSFET) or a silicon RC-IGBT. They feature compact designs and scalability for use in the inverters of EVs and PHEVs. All six J3-Series products will be available… Read more…
GM says equipping the next-gen Chevy Bolt EV with LFP batteries will save billions
EV enthusiasts were disappointed at GM’s decision to discontinue the popular (if a bit dull) Chevy Bolt EV last year. In hindsight, the move may have been premature—the new Ultium EVs that were supposed to replace the Bolt in GM’s lineup have been delayed, causing the company to post embarrassingly low EV sales figures for… Read more…
Eaton’s EV chargers meet California’s CTEP requirements for transparent billing
Intelligent power management company Eaton has announced that its Green Motion EV chargers are certified to meet the California Type Evaluation Program (CTEP) requirements for transparent billing practices. CTEP is a certification program from the California Department of Food and Agriculture’s Division of Measurement Standards (DMS) created to ensure that weighing and measuring devices operate correctly…. Read more…
Depot charging for electric trucks could reduce out-of-route miles
Predicting the future of new technologies (or of anything) is a chancy business, to say the least. And yet, companies and policymakers must indulge in a bit of crystal-gazing in order to choose where to focus their investments. Vehicle electrification is still an emerging technology, and the only thing certain is that it remains uncertain… Read more…
Farasis Energy researches plastic battery housing for increased EV safety
Farasis Energy, a battery manufacturing company, Kautex Textron, a supplier of energy storage systems, and the Fraunhofer Institute for High-Speed Dynamics aim to make plastic-based battery housings safer by means of virtual design to increase the safety of EVs. Farasis, which develops and produces lithium-ion battery technology and pouch cells for electromobility, is developing a… Read more…
Stellantis Ventures invests in Tiamat’s sodium-ion battery technology
Stellantis Ventures has made a strategic investment in France-based sodium-ion battery developer Tiamat. Tiamat says its sodium-ion technology is lithium- and cobalt-free and cheaper per kilowatt hour (kWh) when compared with lithium-ion batteries. The wide availability of sodium boosts sustainability and material sovereignty. Tiamat will use the new funding to start construction of a sodium-ion… Read more…
CISSOID releases new SiC Inverter Control Modules for EVs
Power semiconductor specialist CISSOID released a new series of SiC Inverter Control Modules (ICMs) for the e-mobility market at the recent Applied Power Electronics Conference. These software-powered SiC Inverter Control Modules are designed to help engineers create safe, robust and modular e-motor drives. The new CXT-ICM3SA series offers optimal hardware and software integration of CISSOID’s… Read more…
SK On unveils upgraded fast-charging EV battery cells at Seoul trade show
Battery manufacturer SK On is showcasing new fast-charging battery cells at this week’s InterBattery 2024, a battery trade show in Seoul, South Korea. The Advanced SF and SF+ batteries are among several new technologies that SK On is displaying at the show. The original SF (Super Fast) battery, introduced in 2021, was a high-nickel battery… Read more…
Skanska concludes North American pilot of Volvo EC230 Electric excavator
Construction giant Skanska has completed a 90-day pilot program using the Volvo EC230 Electric excavator on the Purple (D Line) Extension Transit Project in Los Angeles. The goal of the trial was to test the capability of a battery-powered excavator to match the performance of a legacy diesel-powered machine. The excavator was used to load… Read more…
QuantumScape introduces a new cell format for solid-state EV batteries
QuantumScape, a US battery company, has introduced a new cell format, FlexFrame, for solid-state EV batteries. FlexFrame combines pouch and prismatic cells. The FlexFrame architecture has a frame that wraps around the cell stack and a flexible polymer laminate outer layer like pouch cells. The cell is anode-free and the cell stack is contracted, with… Read more…
How to protect an EV’s on-board charger from transient grid surges
Sponsored by Littelfuse. The automotive environment is one of the most severe environments for electronics. Today’s vehicle designs proliferate with sensitive electronics, including electronic controls, infotainment, sensing, battery packs, battery management, electric vehicle powertrains, and on-board chargers. In addition to the heat, voltage transients, and electromagnetic interference (EMI) in the automotive environment, the on-board charger… Read more…