Sponsored by Parker. With the increasing push towards sustainability and efficiency, the electrification of industrial vehicles is not just a technological milestone but a necessity. As electric vehicles (EVs) revolutionize transportation and extend their reach into diverse industrial sectors, the demand for robust and reliable battery systems becomes ever more critical.  Revolutionizing Industrial Battery Technology… Read more…

In a project that recently started at the Kanzelstein quarry in Gratkorn, Austrian construction company STRABAG is carrying out a two-year trial of German-Swiss construction machinery manufacturer Liebherr’s large hydrogen-powered wheel loader. A hydrogen filling station is being built to refuel the wheel loader directly at the quarry. Energy supplier Energie Steiermark will supply hydrogen for… Read more…

Yoshi Mobility, a US-based mobile charging company, will spin off its fleet fuel division. The move is “part of its renewed commitment to sustainability and an electric future,” the company said. The fleet fueling unit will be acquired by EZFill Holdings. Since emerging from Y-Combinator in 2016, Yoshi has focused on operations in three areas;… Read more…

New York City’s East 34th Street Heliport in midtown Manhattan is going electric. The news was revealed when the operator of the heliport, Atlantic Aviation, a fixed-base operator with over 100 locations, and the New York City Economic Development Corporation announced a renewal of the heliport’s five-year lease. The Big Apple will serve as a… Read more…

Germany-based Freudenberg Sealing Technologies offers a sealing geometry to support electric motor manufacturers at the development stage. In-wheel motors for EVs enable wheel-specific torque control, enhanced comfort and more design space within the vehicle. They create a lower center of gravity, tighter turning radius and higher load capacity for electric buses and offer added value… Read more…

Most EV drivers probably don’t think much about the connectors in their charging stations, but a higher-quality connector can deliver faster, more reliable charging and a longer service life. Smiths Interconnect touts several advantages of its Hypertac Green Connect socket for CCS chargers. Designed to IEC 62196 and SAE J1772 standards, Hypertac Green Connect offers… Read more…

Multinational electronics company Toshiba is partnering with Japanese bus operator Rinko Bus and Swiss electric bus equipment manufacturer Drive Electro Technology on a demonstration project to test the effectiveness of a rapid-charging battery powered by a pantograph to charge an electric bus in 10 minutes. Drive Electro Technology will produce the pantograph charging system and… Read more…

Battery technology manufacturer American Battery Solutions (ABS) has released series and parallel configurations for its Proliance high-voltage line of lithium-ion battery pack designs for the fleet, commercial and off-highway vehicle markets, as well as the emerging marine EV market. The T350-50 series connection allows for increased overall system voltage while keeping the same capacity. The… Read more…

US-based paint and specialty materials manufacturer PPG has developed a new method for applying battery fire protection coatings, called Intelligent Dynamic Non-Masking Airless Application (IDNMAA). PPG says the battery fire protection coatings they developed are highly adaptable, enabling them to accommodate any battery pack design—an essential feature as packs become increasingly complicated. IDNMAA technology merges… Read more…

Japanese crane manufacturer Tadano is introducing its fully electric EVOLT eGR-1000XLL-1 rough terrain crane in the US and Canada. The new crane delivers the same lifting capability as its 100-ton rough-terrain GR1000XLL-4 in a quieter, zero-emissions package. The eGR-1000XLL-1 offers up to seven hours of lifting or up to five hours of lifting plus 5.5… Read more…

Beam Global sells an innovative portable solar-powered EV charger that fits in a parking space and can be set up in mere hours. Obvious applications for the EV ARC include off-grid and/or temporary charging needs, such as events of disaster relief (a few of these would have come in handy here in St. Pete, Florida… Read more…

InductEV, a pioneer in inductive wireless vehicle charging, has announced that its technology has been named as a TIME Best Invention for 2024. TIME’s editors selected the Pennsylvania-based company’s technology for its annual list of 200 groundbreaking inventions, based on a number of factors, including originality, efficacy, ambition and impact. It’s common for consumer publications… Read more…

Lithium-ion battery technology developer 24M has released new testing data for its Impervio battery separator. The testing was related to the issue of battery-fire risk in EVs, energy storage systems and consumer applications. The company’s Impervio battery separator was designed to reduce the risk of overcharging that can cause metallic dendrite formation and internal shorts,… Read more…

General Motors (GM) has entered into a new investment agreement with Lithium Americas to establish a joint venture (JV) to fund, develop, construct and operate the Thacker Pass lithium carbonate project in Humboldt County, Nevada. GM will provide $430 million of direct cash funding and a $195 million letter of credit facility to support the… Read more…

Government officials from six cities in the US as well as Montreal, Canada have made a commitment to use more electric construction equipment in North America. Leaders in the municipalities of Austin, Texas; Boulder County, Colorado; Los Angeles, California; Montréal, Canada; New York City; Philadelphia, Pennsylvania; and San Diego, California pledged to support pursuing programs… Read more…

Rincon Power has introduced its RXX50 Series compact, energy-dense contactor for electric vehicles, electric vertical take-off and landing (eVTOL) and aviation applications. The 500 A contactor offers a 3 MW interrupt rating (1,000 VDC/3,000 A), fast-break actuation technology and a hermetic ceramic seal with gas fill rated up to 170° C. The RXX50 operates in… Read more…

A new ferry line operating electric hydrofoil ships started service on Tuesday in Stockholm. The ferry deployed on this mission by Storstockholms Lokaltrafik, or Greater Stockholm Local Transit, is the Candela P-12 100% electric hydrofoil boat. The P-12 seats up to 30 passengers, is 39 feet, 4.1 inches (11.99 m) in length and has a… Read more…

Nissan has announced that it will introduce affordable bidirectional charging on select EV models in 2026.  Vehicle-to-grid (V2G) technology enables EV owners to sell electricity stored in their car’s battery back to the grid or to use it for powering their homes. A year-long trial in the UK at the University of Nottingham validated the… Read more…

The EPA has selected 55 applicants across 27 states and territories to receive nearly $3 billion in grant funding through the agency’s Clean Ports Program. These grants are aimed at improving air quality by supporting the deployment of zero-emission equipment and associated infrastructure. “Today’s historic $3-billion investment builds on President Biden’s vision of growing our… Read more…

Sponsored by Infineon. Join our expert on-demand webinar to discover the game-changing potential of Infineon’s newly introduced CoolSiC™ Automotive MOSFET 750 V G1 family. Learn how these innovative power switches can simplify, robustify, and optimize your on-board charger, HV-LV DC/DC converter, and battery disconnect applications. Don’t miss out on the latest trends in top-side cooling… Read more…