French trucking company Lohr Industries will be launching a fully electric and modular e-shuttle system called the Cristal in four French cities before the end of 2021. The vehicles will be powered by batteries from Webasto, one of the world’s largest automotive suppliers. Some German cities have also signalled their interest. More…

A 45 V high-withstand voltage battery monitoring device for automotive designs has implemented a supply voltage-divided output for the first time (writes Nick Flaherty). Dividing battery monitoring between high- and low-voltage sources increases the safety of e-mobility designs, as it allows 12 V batteries to be monitored by the same device that monitors the low […] More…

Electric propulsion is spawning aircraft with diverse and novel configurations. The multiple motors, rotors, propellers and fans associated with distributed electric propulsion are shaping many complex and unusual forms in the quest to enhance lift and thrust, and to reduce drag through close aerodynamic coupling with airframes.
One of the most important processes in their development is ensuring that they don’t suffer from damaging vibration. To that end, NASA has used equipment from Hottinger Bruel & Kjær (HBK) to collect and process accelerometer data in ground vibration testing (GVT) for its X-57 Maxwell aircraft. More…

Vehicle electronics supplier Actia has announced it has set up a Power division to consolidate the various activities of the wider Actia Group relating to the design and manufacture of onboard batteries, power electronics and electrification systems for electric and hydrogen hybrid mobility. It says its experience in vehicle electronics and power management means the […] More…

The Electrically and Thermally Conductive and Electromagnetic Interference Shielding Materials (ETEMI) project aims to enhance conventional elastomers, liquid silicon rubber and thermoplastics to address sealing and EMI issues at the same time in EVs. This is driving the development of a new class of electrically conductive sealing materials. More…

How a car moves in response to the forces acting on it is a fundamental determinant of safety, comfort, energy efficiency and driver engagement, and electrification of the powertrain profoundly affects that dynamic behaviour. This influence results from differences in the vehicle’s overall mass and its distribution, when compared with IC-engined vehicles, along with the speed and precision of response inherent in electrical machines. More…

The development of e-mobility platforms requires a complex interplay between different engineering teams for the mechanical, thermal, electrical, control and software design. ROMs from 3D design tools can be substituted for 1D system simulation models to provide more accurate and detailed results, so teams can make an informed and correct design choice earlier. More…

Battery management systems are becoming increasingly safety-critical, as they are responsible for balancing battery cells operating at several hundred volts and maintaining temperatures within narrow working ranges to prevent thermal runaway (writes Peter Donaldson).
Gauging the performance of a BMS during r&d, validation, verification and production is therefore of vital and growing importance. Bloomy Controls’ new Flex BMS Validation System is focused on the validation part, particularly in situations where the developer needs to test more than one BMS design. More…

NeoGraf Solutions has extended its range of graphite materials with the launch of Graf-X graphene nanoplatelets (GNPs) and graphene precursors (GPs) for a range of energy storage applications. More…

StoreDot is developing new a lithium-ion battery technology it calls eXtreme Fast Charging (XFC) that will enable an EV to charge in 5-10 minutes (writes Peter Donaldson).
At the heart of it is a silicon-dominated anode that can accept lithium ions much faster than a graphite anode (thanks to silicon’s lower resistance) but controls the tendency of silicon to swell when it accepts those ions that would otherwise generate damaging mechanical forces inside the battery, the company’s CEO Doron Myersdorf says.
The Israeli start-up is backed investors Samsung, Daimler, BP and TDK, has raised about $130 million in capital, owns around 100 patents and has 35 PhDs in its team of 120 people, with specialisms in areas including materials science, organic chemistry and electrochemistry.
Myersdorf says this number of PhDs provides a level of research power equivalent to two faculties at the Massachusetts Institute of Technology, all focused on the problem of how to charge a battery quickly. More…

Recycling batteries from e-mobility platforms, particularly lithium-ion and lithium iron phosphate (LFP) cells, is an area of increasing focus for the e-mobility industry. More…

G-Pulse and Silicon Mobility have announced that they are designing a high-power multiphase interleaving bidirectional DC-DC converter platform for EVs including those using fuel cells, batteries, hybrid electric and plug-in hybrid electric. It is based on Silicon Mobility’s OLEA control technology, and draws on G-Pulse’s engineering expertise in automotive systems. More…

As with cars and trucks, electric aircraft need access to an extensive network of reliable fast chargers, and in October it was announced that ABB is to develop a megawatt fast-charging infrastructure for Lilium’s short-haul electric jet More…